Tilt hydrometer: every colour, live

Your Tilt broadcasts over Bluetooth; a TiltBridge or TiltPi relays it. Point that gateway at Mashwerk and each Tilt colour follows its batch live. A build-it-yourself Mashwerk sensor is on its way.

Start brewing free

Connect your Tilt in 4 steps

Through the gateway you already use.

Add a gateway
In Mashwerk, open Sensors and add a Tilt gateway. One token covers all your Tilt colours.
Open TiltBridge or TiltPi
Find the setting for the Brewfather custom stream URL.
Paste the Mashwerk address
Replace the Brewfather URL (log.brewfather.net/stream?id=…) with the address shown in Mashwerk.
Assign each colour
Each colour received shows up as a device: assign it to its batch and readings land on the chart.

All your fermenters on one screen

Each Tilt colour follows its own batch, with gravity, temperature, attenuation and progress.

Several Tilts on one gateway
Same chart as iSpindel and GravityMon
Import your old Tilt sheet as CSV

What Mashwerk adds

Next to the recipe

Readings sit next to the planned OG and FG, with the style's ranges.

Attenuation and ABV

Computed live by the brewing engine from your readings.

Ask the copilot

“Is it done?”, “Why did it stall?”: answers from your actual curve.

Every batch kept

Readings stay with the batch, exportable to CSV at any time.

Questions

Do I need a TiltBridge or a TiltPi?

Yes, the Tilt only speaks Bluetooth. Any gateway that can send the Brewfather custom stream works, including TiltBridge, TiltPi and Tilty.

What about my Tilt Google Sheet?

Export it as CSV and import it into the batch: Mashwerk recognises the Tilt columns and colours.

Is my Tilt accurate enough?

A Tilt can be a few points off because of trub and foam, but its trend is very reliable. Calibrate it, then trust the curve rather than one reading.

Is it free?

The free plan includes one sensor; Amateur+ includes five sensors and unlimited history.

Watch your next ferment live

Free plan with one sensor and 90 days of readings, no credit card.